One of the interesting characteristics of the Lexicon is the possibility to switch on and off both effect processors independently….
But his footswitch is quite expensive so I took the decision to build one.
Today I’ll post the correct schematics (already tested ) and I’ll explain the process of testing as well.
Just to be prepared here what we will need.
1 a decent soldering iron and some tin,
2 some electric wire 25 cm circa x3 times and possibly in different colors
3 x2 times good momentary switches
4 just one Professional grade 6.35mm STEREO jack socket
5 x2 6.35mm STEREO jack plugs
6 3 meters 3 poles audio cable.
